Small Flyers are flat promotional printed products that are smaller than our standard flyers. They are a popular and convenient size for distributing promotional material.
Customer must supply appropriately sized print ready art for any images and logos they wish to use on the product. Editing of customer supplied artwork will be at an additional cost.
Small Flyers are one of the most popular tools for getting information about your products and services distributed. They are most commonly handed out or left in public establishments to encourage repeat business or make customers aware of related businesses or offers.
Our standard sizes, listed below, are the most popular in the industry:
- 3.5″ x 8.5″
- 3.667″ x 8.5″
- 4″ x 6″
- 4″ x 8.5″
- 4″ x 9″
- 4″ x 11″
- 4.25″ x 5.5″
- 4.25″ x 11″
- 5.5″ x 8.5″
100# Gloss Text
You may be familiar with this type of stock from the covers of many popular magazines like People and Time.
This paper strikes a balance between thickness and foldability, while the glossy finish on both sides gives your text a professional appearance.
100# Gloss Cover
You may be familiar with this type of stock from standard business cards.
Stiffer than 100# Gloss Text, this glossy finish cover stock offers sharp folds and a sturdy product for a very professional result. This stock is coated on both sides.
70# Uncoated Text
You may be familiar with this type of stock from business stationary or typical letterhead.
This paper has a quality feel, folds easily, and is a good choice when you don’t want a slick and shiny finish.
14pt Uncoated Cover
You may be familiar with this type of stock from thick index cards, though the finish is much higher quality.
This is a very versatile stock. The uncoated finish is good when you don’t want a slick and shiny look, while the firm 14 Pt. stock folds precisely.
AQ 2 Sides
AQ is short for Aqueous Coating. This is a semi-gloss, environmentally friendly, water-based coating applied to the front, Back or Both sides of the printed piece. It provides additional gloss and protection, and it can be written on with a ballpoint pen.
Satin AQ 2 Sides
AQ is short for Aqueous Coating. This is a matte finish, environmentally friendly, water-based coating applied over the entire printed piece. It reduces the gloss of the printing and it can be written on with a ballpoint pen.
UV 2 Sides
UV is short for Ultra Violet Light-Cured Coating. This is a high-gloss coating applied over the front of the printed piece. It is not recommended for printed material you need to write on after being produced.
Full color on both sides of the sheet. This option can reproduce the range of colors you see in a typical photograph out of the standard 4 printing colors: cyan, magenta, yellow, and black.
Full color (cyan, magenta, yellow, and black as above) on the front and black on the back.
Full color (cyan, magenta, yellow, and black as above) on the front and no printing on the back.
In order to ensure your files are print-ready, we recommend that you upload them in PDF format. When you generate a print-ready PDF, your computer will use the settings in Adobe Acrobat Distiller or any other PDF generating programs you may use. Please make sure that these are set properly before generating your PDF file.
We also accept .JPG (JPEG), .EPS and .TIF (TIFF) file types, however PDF is the preferred format.
Check your file to make sure it meets our file creation guidelines. This will help speed up the production of your project and give your printed piece the best results.
- Use the CMYK colorspace (Cyan, Magenta, Yellow, blacK). These are industry standard printing colors. CMYK colors are different than RGB (Red, Green, Blue), which are used to display colors on your screen.
- Use a minimum resolution of 300 dpi for image files.
- Specify trim area with crop marks. (Don’t place crop marks inside the work area.)
- Artwork should have 1/8″ (0.125″) bleed extending past the trim line. This is to prevent minor cutting variations from leaving unintended results at the trim edge.
- Safe Area is the 1/8″ (0.125″) area inside the trim line. Do not put critical information or images within the Safe Area. This is to prevent minor cutting variations from leaving unintended results at the trim edge.
- If you want printed borders, they must be placed a minimum of 1/8″ (0.125″) inside the trim line and include bleed. This is to prevent minor cutting variations from leaving unintended results at the trim edge.