Flags
Showing 1–15 of 25 results
- Falcon Flag, Flags
Falcon Flag Banner Complete Package
Falcon Flag is intended for display outdoors using the spike base but can be used inside using the X-base. The X-base is also a great option for placing this banner stand on concrete or other hard surfaces. The banner design is customized to your graphic artwork and is printed on a polyester mesh by the process of dye sublimation. Our inks heavily saturate the material to create a “bleed-through” effect for our single-sided displays. Black flag trim is sewn on the edge of the graphic (pole-side), leaving a pocket for the pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord can loop through and snugly attach the graphic to the base.
SKU: VPSFALCONFLAGBANNER - Flags, Store Front Flag
Store Front Flag Banner Complete Package
This Store Front flag is designed for storefront display but can be placed indoors as desired. Its heavy steel square base provides support while on display. The pole is made of up materials such as aluminum, plastic and fiberglass. The banner design is customized to your graphic artwork, and is printed on a polyester mesh by the process of dye sublimation (single-sided or double-sided options). Black flag trim (pocket trim) is sewn on the edge of the graphic (pole-side), leaving a pocket for the pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.
SKU: VPSSF-FLAGG - Flags, Mamba Flag
Mamba Flag Banner Complete Package
The Mamba Banner Stand outdoor flag comes with a single-sided custom print, stand and spike base or x-base. The small Mamba Flag is available in double-sided print. Use this flag on any grass or soft, penetrable ground. Upgrade to an X-base to use on any hard ground outside, such as concrete, or indoors (ceiling height permitting). The banner design is customized to your graphic artwork and is printed on a polyester-blend mesh material by the process of dye sublimation. Our inks heavily saturate the material to create a “bleed-through” effect for our single-sided displays. Black flag trim (pocket trim) is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets is installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.
SKU: VPSMAMBAFCP - Flags, Mondo Flag
Mondo Flag Banner Complete Package
This 23ft Mondo Flagpole banner stand comes with a single-sided or double-sided custom print, stand and water base. A fresh, new design of the giant pole, the Mondo flagpole is ideal for outdoor events, conference, sports events, etc. The banner design is customized to your graphic artwork and is printed on a polyester-blend mesh fabric material by the process of dye sublimation. Our inks heavily saturate the material to create a “bleed-through” effect for our single-sided displays. For the double-sided 23ft Mondo graphic, we print two (2) separate flags, and we place a silver-gray blocker material in the middle. All 2 pieces of fabric are sewn together to create a non-see-through double-sided banner flag. The telescopic aluminum flagpole fits into a plastic base that can be filled with water for stability. The flag is held with rings. Mondo flagpoles are easy to handle and install.
SKU: VPSMONDOFCP - Flags, Splash Flag
Splash Flag Banner Complete Package
This Splash Outdoor Banner Stand is great for indoor and outdoor use. Slide the banner onto the top perpendicular bar, then fastened to the pole using the included plastic clips. As you might tell, the banner flag is very secure and displays proudly and fully with help of the top bar. The pole height can be adjusted from 4.1 ft. to 10.4 ft. The flag only comes in single sided due to the mesh fabric with heights ranging from 5 ft. to 8 ft. The flag width is 32 inches. The 25-pound weighted steel base provides stability.
SKU: VPSSPLASHFLAG - Flags, Splash Flag
Splash Flag (Graphic Only)
This Splash Outdoor Banner Stand is great for indoor and outdoor use. Slide the banner onto the top perpendicular bar, then fastened to the pole using the 8 included plastic clips. As you might tell, the banner flag is very secure and displays proudly and fully with help of the top bar. The pole height can be adjusted from 4.1 ft. to 10.4 ft. The flag only comes in single sided due to the mesh fabric with heights ranging from 5 ft. to 8 ft. The flag width is 32 inches. The 25-pound weighted steel base provides stability.
SKU: n/a - Flags, Splash Flag
Splash Flag (Stand Only)
This Splash Outdoor Banner Stand is great for indoor and outdoor use. Slide the banner onto the top perpendicular bar, then fastened to the pole using the 8 included plastic clips. The pole height can be adjusted from 4.1 ft. to 10.4 ft. The 25-pound weighted steel base provides stability.
SKU: VPSSPL