Stretch Table Throw
Get your graphic edge-to-edge custom printed on stretch table throw. Available in 3-sided (open back) and 4-sided. Our Stretch Table Throws fit tapered and taut around the table and secures under its legs.
$186.85
Get your graphic edge-to-edge custom printed on stretch table throw. Available in 3-sided (open back) and 4-sided. Our Stretch Table Throws fit tapered and taut around the table and secures under its legs.
Display Dimension
- 4′ Throw: 48″ W x 29″ H x 23.5″ D
- 6′ Throw: 71.5″ W x 30.5″ H x 28.5″ D
- 8′ Throw: 95″ W x 30.5″ H x 28.5″ D
Graphic Dimensions
4′ Throw: 48″ W x 29.5″ H
6′ Throw: 131.5″ W x 90.5″ H
8′ Throw: 155″ W x 90.5″ H
Compatible Table Size
4ft Table: 48″ L x 24″ W x 29″ H
6ft Table: 72″ L x 30″ W x 29″ H
8ft Table: 96″ L x 30″ W x 29″ H
Graphic Material
Multi Stretch
Graphic Finishing
Dye – Sub Printing
Display Construction
Edges Sewn
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
-
Flags, Splash Flag
Splash Flag Banner Complete Package
This Splash Outdoor Banner Stand is great for indoor and outdoor use. Slide the banner onto the top perpendicular bar, then fastened to the pole using the included plastic clips. As you might tell, the banner flag is very secure and displays proudly and fully with help of the top bar. The pole height can be adjusted from 4.1 ft. to 10.4 ft. The flag only comes in single sided due to the mesh fabric with heights ranging from 5 ft. to 8 ft. The flag width is 32 inches. The 25-pound weighted steel base provides stability.
SKU: VPSSPLASHFLAG -
Falcon Flag, Flags
Falcon Flag Banner Complete Package
Falcon Flag is intended for display outdoors using the spike base but can be used inside using the X-base. The X-base is also a great option for placing this banner stand on concrete or other hard surfaces. The banner design is customized to your graphic artwork and is printed on a polyester mesh by the process of dye sublimation. Our inks heavily saturate the material to create a “bleed-through” effect for our single-sided displays. Black flag trim is sewn on the edge of the graphic (pole-side), leaving a pocket for the pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord can loop through and snugly attach the graphic to the base.SKU: VPSFALCONFLAGBANNER
There are no reviews yet.