No products in the cart.
Retractable Banner with Display
Retractable Banners with Display are printed in full color on one side on synthetic 12 mil White Block-out Banner material. This product includes a Retractable Banner Display and the banner. One Banner at a time can be stored within the base of a Retractable Banner Display.
When submitting the design for your included Banner, please note that a portion of the banner bottom will remain hidden in the display base; ours hides the bottom 6″.
We offer 2 different Retractable Banner displays:
Economical Display:
This 33″ wide banner display stand is lightweight and portable. Features include a telescopic pole that allows adjustable banner height between 34″ and 78″. When not in use, your Banner is stored inside the anodized aluminum casing which fits easily into the travel bag (included).
- Weight: 5.3 lbs + Banner
- Banner width: 33″
- Banner height: 34″ – 78″
Premium Display:
This 33″ wide Banner display stand features a sleek design with polished ends. The wide base design gives a professional look while providing excellent stability. The Banner display stand holds a banner up to 33″ in width and a fixed height of 80″ that can be changed out in minutes. When not in use, your banner graphic is stored inside the anodized aluminum casing which fits easily into the travel bag (included).
- Weight: 11.1 lbs + Banner
- Banner width: 33″
- Banner height: 80″
Note:
Because of the wide potential size range of our large format products, there are additional file setup considerations. Proofs are typically shown half size. For other details, please review the file setup section carefully.
Due to material, all substrates may expand or shrink from batch to batch, which makes exact cuts very difficult. We do not recommend borders. If you would like borders, please make sure they are at least 2″ thick. We will not reprint if the borders are not exactly the same on all sides after cutting.
ART:
Customer must supply appropriately sized print ready art for any images and logos they wish to use on the product. Editing of customer supplied artwork will be at an additional cost.
Marketing Tips
Retractable Banners with Display are used anywhere you would like to display large format freestanding graphics. They are most often used where portability is a key consideration, such as at trade shows, seminars, and presentations. Retractable Banners with Display are also a good idea if you would like to move them around within your business environment. Consider using them for storefront displays to showcase a new product or special. Our Banners exhibit a wide color gamut, so they are great for colorful graphics. Banner Display stands are designed so that the Banner retracts into the base and can be changed.
There are two types of retractable banner displays available to you.
Economical Display
Highly portable and lightweight, the Economical Display is 33″ wide and supports Banners on a telescopic pole ranging from 34″ to 78″ in height. When not in use, your banner stores inside the anodized aluminum casing. Without a Banner, the display was 5.3 lbs. and fits easily into the included travel bag.
- Weight: 5.3 lbs + Banner
- Banner width: 33″
- Banner height: 34″ – 78″
Premium Display
Sturdy and sleek with polished ends, the Premium Display provides both a professional look and exceptional stability. It is 33″ wide and can hold graphic displays up to 80″ tall, which can be easily swapped out in minutes. When not in use, your Banner stores inside the anodized aluminum casing. Without a Banner, the display was 11.1 lbs. and fits easily into the included travel bag.
- Weight: 11.1 lbs + Banner
- Banner width: 33″
- Banner height: 80″
12 mil White Matte Block-out Banner
With two super smooth white vinyl outer surfaces and a center black layer designed to block light from showing through the banner, this material is perfect for printing high quality graphics that will not be affected by light from behind.
4/0
Full color (cyan, magenta, yellow, and black as above) on the front and no printing on the back.
File Preparation
In order to ensure your files are print-ready, we recommend that you upload them in PDF format. When you generate a print-ready PDF, your computer will use the settings in Adobe Acrobat Distiller or any other PDF generating programs you may use. Please make sure that these are set properly before generating your PDF file.
We also accept .JPG (JPEG), .EPS and .TIF (TIFF) file types, however PDF is the preferred format.
Check your file to make sure it meets our file creation guidelines. This will help speed up the production of your project and give your printed piece the best results.
- Use the CMYK colorspace (Cyan, Magenta, Yellow, blacK). These are industry standard printing colors. CMYK colors are different than RGB (Red, Green, Blue), which are used to display colors on your screen.
- Use a minimum resolution of 300 dpi for image files.
- Specify trim area with crop marks. (Don’t place crop marks inside the work area.)
- Artwork should have 1/8″ (0.125″) bleed extending past the trim line. This is to prevent minor cutting variations from leaving unintended results at the trim edge.
- Safe Area is the 1/8″ (0.125″) area inside the trim line. Do not put critical information or images within the Safe Area. This is to prevent minor cutting variations from leaving unintended results at the trim edge.
- If you want printed borders, they must be placed a minimum of 1/8″ (0.125″) inside the trim line and include bleed. This is to prevent minor cutting variations from leaving unintended results at the trim edge.